About the Post

Author Information

How to recover deleted files from Intel Solid-State Drive 520 external hard drive

19 August, 2014: The Intel 520 Series SSD is a special solid-state drive. For one, it's only 7 millimeters thick, whereas the standard SSD thickness is 9.5mm. This is basically another push of Intel to promote its ultrabook campaign. To make it also fit in a standard 9mm, 2.5-inch hard-drive bay, the drive comes with a frame piece on top that adds another 2.5mm. This piece can be taken off, but then you will need four shorter screws to keep it in the 7mm design. These screws are unfortunately not included, but they seem to be standard screws that you might be able to find at a hardware store.

The second rather unusual aspect of the drive's design is the fact that its housing is made entirely of aluminum, making it both attractive and sturdy. And finally, the drive comes with all the accessories you'd need to use it with a desktop computer, including a SATA cable, a Molex-to-SATA power cable, a 3.5-inch mounting bracket, and mounting screws.

Use "Undelete" to recover deleted files from Intel Solid-State Drive 520 hard drive.

Use "Unformat" to recover data after format Intel Solid-State Drive 520 external hard drive.

Use "Recover partition" to recover files if Intel Solid-State Drive 520 hard drive partition changed or damaged or deleted.

Use "Full Scan" to recover lost files Intel Solid-State Drive 520 if partitions show as "raw" or recover files which can not be found with "undelete"and "unformat" and "recover partition", recover files from raw partition,recover files of partitons which are not NTFS, nor exfat, nor fat32.

For Additional Information Visit the Website at: http://formatdriverecovery.com/

Comments are closed.