About the Post

Author Information

How to recover deleted files from Seagate BlackArmor NAS 420

11 September, 2014: The BlackArmor 420 NAS server has a bold-looking design with four bays on its front and a top part that protrudes farther out, showing off its tiny LCD. Each bay can hold one SATA hard drive of any capacity, meaning currently the device can host up to 12TB of storage. The 420, however, as mentioned, comes with just two hard drives, leaving the other two bays for you to add more storage later. 

The device has a nice drive bay design that allows you to replace and add more storage easily without any tools. Seagate recommends you use only its hard drives. In fact, the company provides tech support only when you use its hard drives, but the BlackArmor will work with SATA hard drives from any vendors. 

Considering its large size, the BlackArmor's fan is surprisingly quiet. Also, it is the first NAS server we've seen that allows you to replace the cooling fan completely if you need to. This will be a useful boon, as over time fans tend to collect dust, become noisier, or just stop working. 

Use "Undelete" to recover deleted files from Seagate BlackArmor NAS 420 

Use "Unformat" to recover data after format Seagate BlackArmor NAS 420 

Use "Recover partition" to recover files if Seagate BlackArmor NAS 420 changed or damaged or deleted. 

Use "Full Scan" to recover lost files Seagate BlackArmor NAS 420 if partitions show as "raw" or recover files which can not be found with "undelete"and "unformat" and "recover partition". 

For Additional Information Visit the Website at: http://partitionrecoverysoftware.cc/

Comments are closed.